How to use the Wireless DMX512

Wireless Dmx512 Transmitter

Wireless DMX512 transmitter sent the standard DMX512 protocol data by wireless way. It thoroughly solve the problem of the data transmitting between controller to lights or light fixture and fixtures. Wireless Dmx512 Transmitter adopt 2.4G global opening ISM frequency band and no licence is needed. With highly-efficient GFSK modulation and 126 channel hopping communication design, it has strong anti-jamming ability .

Parameter:
1.  2.4G Wireless DMX512 transmitter/receiver
2.  Single Key to Operate, Tricolor LED indicator
3.  126 frequency automatic switch, automatic selection without frequency interference,Ensure the reliability of the DMX512 signal communication.
4.  7 group ID code to set different wireless networks without any interfere each other in the same place
5.  Communication distance: 500 m (visible distance)
6.  Working frequency band: 2.4 G ISM, 126 frequency band.
7.  The maximum transmitted power: 20 DBM
8.  Receiving sensitivity: - 94 DBM
9.  DMX connector: 3 pin male/female socket


1. ID code and LED color corresponding relations:

_ 1: RED - - - - - - - - - - - - - - - - - - - - - - - - - Red

_ 2: GREEN - - - - - - - - - - - - - - - - - - - - - - - Green

_ 3: RED + GREED - - - - - - - - -  - -  - - - - - - Yellow

_ 4: BLUE - - - - - - - - - - - - - - - - - - - - - - - - -Blue

_ 5: RED + BLUE - - - - - - - - - - - - -  -  - -- - - Purple

_ 6: GREEN + BLUE - - - - - - - - - -  - - - - - - - Cyan-blue

_ 7: RED + GREED + BLUE - - - - - - - -  - - - -White

2. Click on the button shows the current ID code, Press the "Key" will choose the other ID code.

3. Working Status:

_ LED ON:                  No Dmx wireless signal

_ Red LED flashing:   Sending Signal

_ Green LED flashing: Receiving Signal

4. "1- -7" group of ID code, Press the "KEY" to choose the same ID code. Only the same ID code have mutual communication.